Product Description
- The discs are 2-ply to help reduce lines while preparing metal.
- Each ply is epoxied together to prevent flaring through the life of the surface preparation buffing and blending disc.
- Surface Prep Buff and Blend Discs should be used for moderate surface cleaning and deburring (smoothing) before polishing.
- After surface preparation, one may choose to follow up with sanding at 320 Grit to remove any remnants left behind by the disc.
- For a final polish, follow up with fine-grit Sanding Disc, then use the Tripoli compound and an Airway Buffing Wheel.
- 10" diameter wheels have a 1/2" arbor hole.
- Medium (Blue Disc) can be run at approximately 2,500 RPM.
- Coarse (Green Disc) should be run at about 1,800 RPM.
