Lighting

24 LED Rectangular Pearl Marker Light

24 LEDs - 12V 5-5/16" (L) x 3-7/16" (W) x 1-1/8" (H) Sealed polycarbonate lens, reflector and housing Uses standard 3-prong pigtail

9 LED Rectangular Side Mount Spyder Amber Turn Signal Marker Light

9 LEDs - 12V 5-7/8” (L) x 2-3/8” (W) x 2-3/8” (H) Sealed polycarbonate lens and housing Uses standard 3-prong pigtail

2" or 2.5" round Pearl LED Marker Light

7 High power SMD LEDs - 12V 2" dia. x 1/2" (H) 2-1/2" dia. x 1/2" (H) Reverse polarity protected Sealed polycarbonate lens, reflector and housing Uses standard 2-prong pigtail

24 LED per side Square Double Face Pearl Pedestal Light

24 LEDs per face, 4 LEDs side marker light, 12V 4-1/2” (L) x 2-1/2” (W) x 4-1/2" (H) Universal 1 stud / 2 studs mount Mounting hardware included for stud or bracket mount Chrome plastic housing, high heat acrylic lens 3 wires...

4" 24 LED per side Double Face Pearl Pedestal Light

24 High Power LEDs per Side - 12V Light size: 4-1/4” dia x 2-1/2" deep Stud size: 20 thread, 1/2” dia. x 1-11/16” long Polycarbonate lens and die cast housing Comes with 3 wires Pedestal light extension kits available in 3"/4" long,...

3" 14 LED per side Double Face Pearl Pedestal Light

14 High Power LEDs per Side - 12V Light: 3" Dia. x 1-1/4" (D), Stud: 1-1/2" (L) Polycarbonate lens and die cast housing Comes with 3 wires Pedestal light extension kits available in 3"/4" long, SKU#50150. Click Here

54 LED Dual Function Ultra Thin Air Cleaner Breather Light

54 LEDs - 12V 5-1/8" (L) x 5-1/8" (W) Sealed plastic base Hardwired with three 0.180 bullet plugs Black Wire: Low (power/+) Red Wire: High (power/+) White Wire: Ground (-) Double-sided tape mount

24 LED 4" Assorted Color Load Light with #1156 Female Plug

4" Pearl LED Load Light 24 LEDs - 12V 4-1/8" Dia. x 7/8" (H) Polycarbonate lens, reflector and housing sonically sealed Fits OE stock load light housing behind cab/sleeper 3 mounting screw holes comes with Plug-in #1156 female plug

6 LED Rectangular Marker Light

Features 6 bright LEDs with quality polycarbonate lens. Full epoxy sealed 12V electronics. Recommend use with mounting base, SKU #10263. Click Here DOT/SAE, FMVSS 108.

12 LED Medium Rectangular Marker Light

Polycarbonate lens epoxy sealed to rear cover to prevent moisture intrusion. Solid state circuit board design for 12V DC system. DOT/SAE P2, FMVSS 108.

6 LED Thinline Surface Mount Marker Light

6 LEDs - 12V 4” (L) x 3/4” (W) x 15/16” (H) Ideal for narrow body channel mounting Black rubber gasket included Sealed polycarbonate lens and housing Hardwired with two wires and ground ring Surface mount

8 LED 4" Stop, Turn & Tail Red Fleet Light

Cost Effective Stop, Tail and Turn LED Light 8 Diodes DOT Compliant Polycarbonate Lens resistant to cracks and damage Sold Individually